Digi IX20W
- Cellular connectivity:
- LTE (G4-G) WITH DIGI CORE PLUG-IN LTE MODEM 1002-CMG4-GLB-G
- LTE Cat 4 (EMEA): B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B38, B39, B40, B41;
- 3G: B1, B2, B4, B5, B6, B8, B19
- 2G EDGE / GPRS: 850 / 900 / 1800 / 1900 MHz
- Connectors: (2) 50 Ω SMA (center pin: female)
- SIM slots: (2) Mini-SIM (2FF)
- SIM security: Secured in cellular module
- GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS; Connector: 50 Ω SMA (center pin: female); Protocol NMEA 0183 V3.0; Acquisition Time Hot Start 1 s; Warm Start 29 s; Cold Start 32 s; Accuracy Horizontal: < 2 m (50%), < 5 m (90%); Altitude: < 4 m (50%), < 8 m (90%); Velocity: < 0.2 m/s
- Wi-Fi:
- Module: 1 x 1 SISO dual-band 802.11a/b/g/n/ac (2.4 GHz / 5 GHz)
- Authentication: TACACS+, Enterprise RADIUS
- Modes: Client mode and access point mode simultaneously
- Clients: Maximum 10 clients (access point mode: regardless of combination of clients and access points)
- Access points: Maximum 2 access points (access point mode: regardless of combination of clients and access points)
- Security: WPA-3/WPA-2 personal, WPA/WPA-2 enterprise
- Connectors: (1) 50 Ω SMA (center pin: male)
- Software and management:
- Remote management: Digi Remote Manager®, SNMP v2/v3 (user installed/managed)
- Local management: Web UI (HTTP/HTTPS); CLI (Telnet, SSH)
- Management / troubleshooting tools: FTP client, SCP; protocol analyzer with PCAP for Wireshark; event logging with syslog and SMTP client; NTP/SNTP; Nagios, Intelliflow, iPerf, Dynamic DNS, ping, traceroute
- Memory: 256 MB RAM, 256 MB Flash
- Ethernet:
- Ports: (2) RJ-45; 10/100 Mbps (auto-sensing)
- Serial:
- (1) DB9M; RS-232 DTE; signal support TXD, RXD, CTS, DTR, DCD, flow control software (XON/OFF), hardware supported (CTS/RTS)
- Physical:
- Dimensions (L x W x H): 107 mm x 162 mm x 35 mm (4.21 in x 6.38 in x 1.38 in)
- Weight: 0.65 kg (1.4 lb)
- Status LEDs: Power, Internet, Wi-Fi, SIM 1, SIM 2, Signal Strength (5), LTE
- Enclosure: Glass-filled polyphenylene sulphide (PPS) / IP30
- Power requirements:
- Power input: 9 - 30 VDC, 1.0 A maximum; Connector: 2-position rewireable plug with securing screws included
- Power consumption: 1.5 W (light traffic flow), 3.5 W (peak data transmission); 1.4 W (low power mode, idle traffic, no Ethernet WAN)
- Environmental:
- Operating temperature: −40 °C to 70 °C (−40 °F to 158 °F)
- Storage temperature: −40 °C to 85 °C (−40 °F to 185 °F)
- Relative humidity: 5% to 95% (non-condensing)
- Approvals:
- Cellular: Visit www.digi.com/resources/certifications for latest cellular certifications
- Safety: IEC62368-1, CB, EN62311
- Environmental: ROH53
- Emissions / Immunity: CE; RED; FCC Part 15, Subpart B; ICES-003; AU/NZS CISPR32
- Product warranty: 3-year
- Available accessories: Accessories not included; view available accessories
- Power supply (required, choose industrial extended temperature or commercial)
- Industrial extended temperature power supply with plug tips for US, UK, EU, AU; −20 °C to 70 °C (−4 °F to 158 °F): 76002104
- Commercial temperature power supply with plug tips for US, UK, EU, AU; 0 °C to 40 °C (32 °F to 104 °F): 76002117
- Wi-Fi antenna: 76002105 (recommended / optional)
- Ethernet cable — 2 m (6 ft): 76002106 (recommended / optional)
- Cellular antenna — 700 MHz to 2.7 GHz: 76000926 (recommended / optional)
- DIN rail mounting bracket kit: 76002093 (recommended / optional)
- DIN rail clip kit: 76002095 (recommended / optional)
- Cellular antenna — 600 MHz to 6 GHz: 76002114 (recommended / optional)
- Antenna — active GPS, 1575 MHz: 76000842 (recommended / optional)
What's in the box
- Digi IX20W — LTE Cat 4 EMEA; Wi-Fi; GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS; (2) Ethernet; DB-9 RS-232
*Digi CORE 1002-CMG4-GLB-G requires two cellular antennas with option for a third GNSS / GPS antenna. Wi-Fi antenna available for Wi-Fi enabled models.